Organization
- Plenary sessions
- Parallel sessions
- Stand Exhibition
| 8:00 - 8:15 | Registration |
| 8:30 | Welcome address, Workshop objectives & VITAL highlights (Jean-Jacques Korsia, Snecma) |
| 9:00 | EU policy for green air transport (Andras Siegler, Eropean Commission) |
| 9:30 | VITAL aircraft assessment (Laurent Saint-Marc, Airbus- France) |
| 10:00 | NEWAC overview |
| 10:30 | Coffee break |
| 11:00 |
Aerodynamics & Perf. : DDTF fan aero/noise rig design & manufacture (Annegret Siebert, Rolls-Royce UK) |
| Noise : radial mode detection of tonal turbofan noise at a modular fan rig test facility (Ulf Tapken, DLR) | |
| Lightweight : Lightweight fan design & manufacture (Ewan Thompson, Rolls-Royce) | |
| 11:30 |
Aerodynamics & Perf. : Unsteady measurement for flow characterisation of counter rotating fan (R. Meyer, DLR |
| Noise : Circumferential mode detection in turbofan engine ducts ( H.Van der Wal, NL) | |
| Leightweight : Material & specimen modelling & testing developments in VITAL (N. Petrinic, Oxford Univ. & A. Langkamp, TU Dresden) | |
| 12:00 |
Aerodynamics & Perf. : Aeromechanical opimisation of counter rotating fan blades count with multi-physics method&generic algorithm (I. Lepot, CENAERO) |
| Noise : CRTF fan aerodynamic & acoustic design & concept improvment (J. Talbotec, Snecma) | |
| Leightweight : Leightweight fan mechanical test (J. Marshall, Rolls-Royce UK) | |
| 12:30 -14:00 | Lunch |
| 14:00 | NACRE overview (joao Frota, Airbus) |
| 14:30 | European networks activities on environmental interdependencies |
| 15:00 |
Aerodynamics & Perf. : Numerical investigation of seal leakage flow in highly loaded booster (J-F Thomas, CENAERO) |
| Noise : C3-A aero-acoustic test facility & use for VITAL counter rotating fan tests (V. Mileshin, CIAM) | |
| Leightweight : Development and testing of a composite fan frame structure (A. Sjunesson, Volvo AC) | |
| 16:00 | coffe break |
| 16:30 |
Aerodynamics & Perf. : Investigation of turbine endwall countouring (D. Dunn, CSIR) |
| Noise : Aerodynamical & mechanical design & optimisation of a CRTF fan with reduced blade number (E. Nicke, DLR) | |
| Leightweight : Validation of composite cure deformation simulations with 3D-optical metrology (P. Fernberg, Swerea SICOMP) | |
| 17:00 |
Aerodynamics & Perf. : high aspect ratio efficient turbines (R. Vasquez, ITP) |
| Noise : Multi-sensors & multirings acoustic measurement for modal analysis on CRTF fan noise generation (H Van der Wall, NLR) | |
| Leightweight : About the feasability for thermoplastic composite fan structures (O. Lenk, Rolls-Royce D) | |
| 17:30 |
Aerodynamics & Perf. : Evaluation of high stage loading potential for low pressure turbines (T.: Schroeder, MTU) |
| Noise : Advanced aero-acoustic method development CRTF fan design & experimental validation (R. Davy, ONERA) | |
| Leightweight : the new alloy 718Plus in comparison with the standard 718 alloy (G/ Sjöberg, Volvo AC) | |
| End of Day 1 | |
| 8:00 - 8:15 | Russian Aeronautics research Overview - V. Mileshin, CIAM |
| 9:00 | Airliner Policy |
| 9:30 |
Aerodynamics & Perf. : Lightweight thrust reverser & variable nozzles (P. Caruel, Aircelle) |
| Noise : Advanced aerodynamic method development for CRTF fan design, for acoustic evaluation and experimental validation (G. Gerolymos, UPMC) | |
| Lightweight : Metallic matrix composite properties & feasibility instead of steel alloy for turbine shaft applicationq ( C. Iweins, Snecma) | |
| 10:00 |
Aerodynamics & Perf. : cascade less thrust reverser study (D.Riordan, Short Brothers) |
| Noise : Computational unsteady aerodynamics & aeroacoustics of counterrotating fans (N. Ben Nasr, UPMC) | |
| Leightweight : Metallic Shaft, (K. Pirker, MTU) | |
| 10:30 | Coffee break |
| 11:00 |
Aerodynamics & Perf. : Experimental investigation on highly loaded low pressure turbine cascades (M. Martinsletter, Univrsity Germany) |
| Noise : Low noise turbine design a parametric study ( F. Poli, University of Florence) | |
| Leightweight : Advanced hot structures overview of activities performed in VITAL, (F. Marquina, ITP) | |
| 11:30 | Aerodynamics & Perf. Damping characterisation of a simplified rotor with tip shrouds (D.<Botto, Politecnico di Torino) |
| Noise : Experimental investigation of low pressure turbine noise | |
| Leightweight : Lifing methodologies for welded hot aeroengine structures in IN718 (A. Becker, Nottingham university) | |
| 12:00 |
Aerodynamics & Perf. : Ceramic turbine vanes for green aero-engines (A. Licciulli, university of Salento) |
| Noise : Application of trailing edge blowing and boundary layer suction to control the wake shed from a high-lift turbine profile (F. Satta, University of Genova) | |
| Leightweight : Development of a simplified whole engine model for the application in the preliminary design phase. (D. Marcel Springmann, Cottbus university) | |
| 12:30 | lunch |
| 14:00 | Overview of Clean Sky Joint technology Initiative - I.Dubois, Snecma |
| 14:30 | Dream overview - D. Bone, rolls-Rpyce |
| 15:00 |
Aerodynamics & Perf. : Experimental & numerical investigation of a single syage low pressure compressor with and without casing treatment. (B. Farkas, N. Van de Vyer, Von Karman Institute) |
| Noise : UHSL low pressure turbone - Noise reduction : validation of turbine noise prediction tools with acoustic rig measurements (D. Broszat, MTU Aero engines) | |
| Leightweight : UHAR/ULN low pressure turbine - experimental data for lightweight design optimisation (F. Marquina, ITP) | |
| 15:30 |
Aerodynamics & Perf. : observation from a variable area fan nozzle study (D. Riordan, Short Brothers) |
| Noise : CFD and particle Image Velocimetry assessment for jet mixing (F. Dezitter, Airbus) | |
| Leightweight : Achievements in active fixture development (M. Ericsson, university west) | |
| 16:00 | coffee break |
| 16:30 |
Aerodynamics & Perf. : Techno-Economical & Risk Assessment (TERA020) software development & VITAL assessment (S. Ogaji, Cranfield university) |
| Noise : SOPRANO tool (Dax AU, ISAE) | |
| Leightweight : Robotic assembly of fabricated aero-engine structures (P. Webb, university of Nottingham) | |
| 17:00 | Aerodynamics & Perf. : laminar flow nacelle (D. Riordan, Short brothers) |
| Noise : Assessment of the jet acoustics of conventional & serrated nozzle (J. Huber, Airbus) | |
| Leightweight : Laser welding and automated non-destructive testing for fabricated titanium structures (T. Jensen & J. Norgaard, Force technology) | |
| 17:30 | Conclusions & closure speeches |
| 18:30 | Toast and end of the workshop |
